VisitorAnalyser

Redesign a Part with no available data?


Redesign a Part with no available data?
Challenge:

John needs to design a new tool for a revision to an existing part. John’s problem: No CAD file and incomplete dimensions for the existing drawing; he only has the existing part.

When your prototype has to be Glass Filled Nylon


When your prototype has to be Glass Filled Nylon
Challenge:

Prototypes are required for product testing and 3D printed parts may not be adequate. In some requirements, prototypes must be made from the production material, in this case glass filled nylon. Part geometry must be the same as the final production parts so that the test results are valid. Actual production material for prototype testing is needed before commitment to high volume injection molds.

Standing the Test of Time

Results of an aging test of Somos resins.


Standing the Test of Time

Somos had completed a one-year aging test of Somos material used at Sicam, the Somos XC 11122 and the Somos Next.

Where is 3D Printing Heading?

New medical use of 3D Printing


Where is 3D Printing Heading?

This month a patient received a 3D printed implant that replaced 75% of his skull. This is a first of its kind procedure, recently approved by the U.S. Food and Drug Administration.

Bridge Tooling - One tool 3 Destinations

Tired of delays in time to market from prototyping to having parts approved for production?


Bridge Tooling - One tool 3 Destinations

For the majority of our customers the prototyping phase is only the beginning of the journey towards production.  A word of caution if you are using aluminum tooling (soft tooling) for your prototypes then the journey starts anew once you head into the development of “hard tooling”.  However, if you had used SICAM’s Bridge Tooling the move towards production is a smooth transition.

RSS
12345

Theme picker

EasyDNNNews

Upcoming Events

Theme picker